66 1 2 3 6 5 4 gu (general use) type sop series [1-channel (form b) type] mm inch 6.3 0.2 .248 .008 4.4 0.2 .173 .008 2.1 0.2 .083 .008 features 1. 1 channel (form b) in super minia- ture design the device comes in a super-miniature so package measuring (w) 4.4 (l) 6.3 (h) 2.1 mm (w) .173 (l) .248 (h) .083 inch approx. 25% of the volume and 50% of the footprint size of dip type pho- tomos relays. volume (sop) (dip) approx. 25% footprint approx. 50% 2. low on resistance (max. 50 w ) at 400 v for normally-closed type has been achieved thanks to the built-in mosfet processed by our proprietary method, dsd (double-diffused and se- lective doping) method. source electrode n n + n + n + p + n + n + p + gate electrode passivation membrane cross section of the normally-closed type of power mos intermediate insulating membrane gate oxidation membrane drain electrode 3. tape and reel the device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automat- ic insertion machines. 4. controls low-level analog signals photomos relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 5. low-level off state leakage current in contrast to the ssr with an off state leakage current of several milliamps, the photomos relay features a very small off state leakage current of only 100 pa even at the rated load voltage of 400 v. 6. low thermal electromotive force (approx. 1 m v) typical applications ? telephones ? measuring instruments ? computer ? industrial robots ? high-speed inspection machines types *indicate the peak ac and dc values. notes: (1) tape package is the standard packing style. also available in tube. (part no. suf?x "x" ro "z" is not needed when orde ring; tube: 75 pcs.; case: 1,500 pcs.) (2) for space reasons, the top two letters of the product number "aq" are ommitted on the product seal. the package type indicat or "x" and "z" are also omitted from the seal. (ex. the label for product number aqv414s is v414s). type output ratings* part no. packing quantity in tape and reel load voltage load current picked from the 1/2/3-pin side picked from the 4/5/6-pin side ac/dc 400 v 100 ma AQV414SX aqv414sz 1,000 pcs. rating 1. absolute maximum ratings (ambient temperature: 25 c 77 f ) item symbol type of connection aqv414s remarks input led forward current i f 50 ma led reverse voltage v r 3 v peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% power dissipation p in 75 mw output load voltage (peak ac) v l 400 v continuous load current i l a 0.10 a a connection: peak ac, dc b,c connection: dc b 0.11 a c 0.12 a peak load current i peak 0.3 a a connection: 100 ms (1 shot) v l = dc power dissipation p out 450 mw total power dissipation p t 500 mw i/o isolation voltage v iso 1,500 v ac temperature limits operating t opr C40 c to +85 c C40 f to +185 f non-condensing at low temperatures storage t stg C40 c to +100 c C40 f to +212 f photomos relays
aqv414s 67 2. electrical characteristics (ambient temperature: 25 c 77 f ) note: recommendable led forward current i f = 5ma. for type of connection, see page 32. *turn on/turn off time n for dimensions, see page 28. n for schematic and wiring diagrams, see page 32. n for cautions for use, see page 36. item symbol type of connec- tion aqv414s remarks input led operate current typical i fon 0.6 ma i l = max. maximum 3 ma led turn off current minimum i foff 0.4 ma i l = max. typical 0.55 ma led dropout voltage typical v f 1.14 v (1.25 v at i f = 50 ma) i f = 5 ma maximum 1.5 v output on resistance typical r on a 26 w i f = 5 ma i l = max. within 1 s on time maximum 50 w typical r on b 20 w i f = 5 ma i l = max. within 1 s on time maximum 25 w typical r on c 10 w i f = 5 ma i l = max. within 1 s on time maximum 12.5 w off state leakage current maximum i leak 1 m a i f = 0 v l = max. transfer characteristics turn on time* typical t on 0.47 ms i f = 5 ma v l = max. maximum 1.0 ms turn off time typical t off 0.28 ms i f = 5 ma v l = max. maximum 1.0 ms i/o capacitance typical c iso 0.8 pf f = 1 mhz v b = 0 maximum 1.5 pf initial i/c isolation resistance minimum r iso 1,000 m w 500 v dc toff input output 10% 90% ton reference data 1. load current vs. ambient temperature char- acteristics allowable ambient temperature: C40 c to +85 c C40 f to +185 f type of connection: a 2. on resistance vs. ambient temperature char- acteristics measured portion: between terminals 4 and 6; led current: 0 ma; continuous load current: 100 ma (dc) 3. operate (off) time vs. ambient temperature characteristics led current: 5 ma; load voltage: 400 v (dc); continuous load current: 100 ma (dc) ?0 ?0 8085 100 120 100 80 60 40 20 0 140 0 20 40 60 100 120 100 80 60 40 20 0 140 load current, ma ambient temperature, c 02040608085 50 40 30 20 10 0 ?0 ?0 on resistance, ambient temperature, c 0 ?0 ?0 20 40 60 8085 1.0 0.8 0.6 0.4 0.2 0 operate (off) time, ms ambient temperature, c
aqv414s 68 4. reverse (on) time vs. ambient temperature characteristics led current: 50 ma; load voltage: 400 v (dc); continuous load current: 100 ma (dc) 5. led operate (off) current vs. ambient tem- perature characteristics load voltage: 400 v (dc); continuous load current: 100 ma (dc) 6. led reverse (on) current vs. ambient tem- perature characteristics load voltage: 400 v (dc); continuous load current: 100 ma (dc) 0 ?0 ?0 20 40 60 8085 1.0 0.8 0.6 0.4 0.2 0 reverse (on) time, ms ambient temperature, c 0 ?0 ?0 20 40 60 8085 5 4 3 2 1 0 led operate (off) current, ma ambient temperature, c -20 0 20 60 40 80 85 5 4 3 2 1 0 ?0 led operate (on) current, ma ambient temperature, c 7. led dropout voltage vs. ambient tempera- ture characteristics led current: 5 to 50 ma 8. voltage vs. current characteristics of output at mos portion measured portion: between terminals 4 and 6; ambient temperature: 25 c 77 f 9. off state leakage current measured portion: between terminals 4 and 6; led current: 5 ma; ambient temperature: 25 c 77 f 50m 30m 20m 10m 5ma ?0 -20 0 20 40 60 80 100 85 1.5 1.4 1.3 1.2 1.1 1.0 0 led drop out voltage, v ambient temperature, c 20 40 60 80 100 ?0 ?0 ?0 ?0 ?00 ? ? ? ? ? 12345 voltage,v current, ma 20 060 40 80 100 10 ? 10 ? 10 ? 10 ?2 load voltage, v off state leakage current, a 10. led forward current vs. operate (off) time characteristics measured portion: between terminals 4 and 6; load voltage: 400 v (dc); continuous load current: 100 ma (dc); ambient temperature: 25 c 77 f 11. led forward current vs. reverse (on) time characteristics measured portion: between terminals 4 and 6; load voltage: 400 v (dc); continuous load current: 100 ma (dc); ambient temperature: 25 c 77 f 12. applied voltage vs. output capacitance characteristics measured portion: between terminals 4 and 6; frequency: 1 mhz; ambient temperature: 25 c 77 f 10 20 30 40 50 60 3.0 2.5 2.0 1.5 1.0 0.5 0 operate (off) time, ms led forward current, ma 10 20 30 40 50 60 10 20 30 40 50 60 0.6 0.5 0.4 0.3 0.2 0.1 0 reverse (on) time, ms led forward current, ma 10 20 30 40 50 60 120 100 80 60 40 20 0 output capacitance, pf applied voltage, v 5/7/2001 all rights reserved, ? copyright matsushita electric works, ltd. go to online catalog
|
